Product: Bently Nevada 3500/15-05-05-00 106M1081-01 Universal AC Power Input Module

Description

Description
The 3500/15 AC and DC Power Supplies are half-height modules and must be installed in designated slots on the left side of the rack. The 3500 rack can contain one or two power supplies with any combinations of AC and DC. Either supply can power a full rack.

When two power supplies are installed in a rack, the one in the lower slot acts as the primary supply, and the other in the upper slot acts as the backup supply. If installed, the second supply is the backup for the primary one.

Removing or inserting either power supply module does not disrupt operation of the rack as long as a second power supply is installed. The 3500/15 AC and DC Power Supplies accepts a wide range of input
voltages and converts them to voltages acceptable for use by other 3500 modules. The following power supplies are available with the 3500 Series Machinery Protection System:

l Universal AC Power
l High Voltage DC Power Supply
l Low Voltage DC Power Supply
The Universal AC Power Supply and PIM (Power Input Module) are not compatible with the Legacy 3500 AC Power Supply, High Voltage AC PIM and Low Voltage AC PIM.

The High Voltage and Low Voltage DC Power Supplies and PIM(Power Input Module) are NOT compatible with the Legacy 3500 High Voltage and Low Voltage DC Power Supplies and PIMs.

Ordering Information
For the detailed listing of country and product specific approvals, refer to the Approvals Quick Reference Guide (108M1756) available from Bently.com.

3500/15 Power Supply Module
3500/15 - - AA- BB- CC

A: Power Supply Type (Top Slot)
03 Legacy High Voltage DC (88 to 140 Vdc)
04 Legacy Low Voltage DC (20 to 30 Vdc)
05 Universal AC Voltage (85 to 264 Vac rms)
06 High Voltage DC Supply
07 Low Voltage DC Supply

B: Power Supply Type (Bottom Slot)
00 No Supply (Used when no supply is required)
03 Legacy High Voltage DC (88 to 140 Vdc)
04 Legacy Low Voltage DC (20 to 30 Vdc)
05 Universal AC Voltage (85 to 264 Vac rms)
06 High Voltage DC Supply
07 Low Voltage DC Supply

C: Agency Approval
00 None
01 CSA / NRTL / C (Class 1, Division 2)
02 ATEX / IECEx / CSA (Class 1, Zone 2)

Spares
Part Number Description
106M1079-01 Universal AC Power Supply Module
106M1081-01 Universal AC Power Input Module
129486-01 Legacy High Voltage DC Power Supply Module
129478-01 Legacy High Voltage DC Power Input Module
133292-01 Legacy Low Voltage DC Power Supply Module
133300-01 Legacy Low Voltage DC Power Input Module
114M5329-01 High Voltage DC Power Supply
115M7750-01 High Voltage DC PIM
114M5330-01 Low Voltage DC Power Supply
114M5335-01 Low Voltage DC PIM

Recommended Products

We are the supplier for industrial automation spare parts.We specialize in PLC module, DCS card pieces, ESD system card pieces, vibration monitoring system card pieces, steam turbine control system module, gas generator spare parts, we have established the relationship with famouse PLC DCS product maintenance service providers in the world.

Our products are widely used in CNC machinery and metallurgy, oil and gas, petrochemical, chemical, paper printing, textile printing and dyeing, machinery, electronics manufacturing, automobile manufacturing, tobacco, plastic machinery, electricity, water conservancy, water treatment / environmental protection, municipal engineering, Heating, energy, transmission and distribution industries.

We have large of inventory for our company's advantage products

All of kinds of DCS、PLC parts：

Germany KONRAD:

EC6423 / EC6424 / EC6426 / EC6430 / EC6432 / EC6433 series of eddy current sensors,

EC20382 displacement sensor, MMS7000 monitoring and protection system.

Bently Nevada:

3500 system / 3300 system monitoring and protection system, the front eddy current sensor probe

Germany EPRO

PR6422 / PR6423 / PR6424 / PR6426 eddy current sensor, PR9268 series of electric absolute vibration sensor,MMS6000 system.

ENTEK:

Eddy current sensor probe, vibration monitoring table dual channel shaft vibration watch table C6652.

VIBRO-METER:

Vibration sensor, acceleration sensor, eddy current sensor, monitoring system module gateway communication module.

Rockwell Allen-Bradley:

SLC500: 1747/1746 series

MicroLogix: 1761/1763/1762/1766/1764 series

CompactLogix: 1769/1768 series

Logix5000: 1756/1789/1794/1760/1788 series

PLC-5: 1771/1785 series

Schneider Modicon:

Quantum 140 series: CPU processor module, communication module, analog input and output modules, digital input and output modules.

GE:

IC63 / IC695 / IC697 / IC698 / IC200 / IC660 / IC670 and other CPU modules, communication modules, analog digital modules.

EX2100, EX2000 Excitation system card IS200 series, DS200 series.

Invensys Foxboro:

I / A Series system, FBM (field input / output module) sequence control, trapezoidal logic control, accident recall processing, number

Analog conversion, input / output signal processing, data communication and processing.

Invensys Triconex:

Redundant fault-tolerant control system, and the most modern fault-tolerant controller based on triple-module redundancy (TMR) architecture.

Westinghouse:

OVATION system, WDPF system, WEStation system spare parts.

Honeywell:

Alcont, Experion LS, Experion PKS, Experion HS, Plant Scape,

TDC 2000, TDC3000, TPS, security systems.

ABB:

AC800M series module, industrial robot spare parts DSQC series, Bailey INFI 90,800xA, Advant OCS withMaster Software, Advant OCS with MOD 300 software, Freelance - Distributed control system for the process industry

Symphony Melody, Satt OCS, Symphony DCI System Six, Harmony / INFI 90, security systems, etc.

Emerson:

DeltaV systems, dual-channel redundant security systems, redundant controllers, power modules, and

I / O unit, Analog AI module, Analog AO module.

Siemens:

Siemens MOORE, 6ES5 series, 6GK series, 6DD series, 6AR series.

Yokogawa:

CS3000 system CPU controller module, analog module.

Woodward:

SPC valve position controller, 505 / 505E (9907-162,9907-164,9907-165,9907-167) digital controller,

2301A controller 9905 series, 2301D-ST series